Pedrollo CPm158 Pump
KSh18,000 Incl. VAT
- Quiet operation due to the anti-vibration system between shaft and impeller
- Compact and more efficient motor with low energy consumption and lower operating temperature.
- Special paint which gives improved resistance against environmental corrosion
- Extended Life
- Uses: domestic
- Applications: irrigation pumps, cooling systems, air conditioning systems, water supply systems, liquids transfer, pressure systems
- Typology: surface
The PEDROLLO CP range of products are non-self-priming closed impeller pumps with integral motors. They are efficient, quiet and rated for continuous duty making them suitable for water boosting and transfer in a variety of domestic, industrial and agricultural applications. They are also particularly suited to automatic pressurised supply using either a surge tank or ‘Presscontrol’ unit. Pump construction material is cast iron for the casing and brass alloy for impellers except for Cpm130 which uses techno plastic and CPm150 which uses stainless steel.
Pumps can be installed for manual or automatic control using either the unique ‘Presscontrol’ unit or a pressure tank and switch. CPm158 is available with the ‘Hydrofresh’ option combines a 24L horizontal diaphragm tank, pressure switch and gauge with pressure settings of 1.8Bar for pump start and 3.2bar for pump stop.
Pumps are close-coupled to a Pedrollo brushless TEFC induction motor designed for continuous operation. Single-phase motors are provided with a thermal cutout in the windings to protect against electric and mechanical overload and can be connected directly to the mains power supply through a 10Amp fuse or MCB. Three-phase motors require remote DOL starter protection according to local regulations.
|Dimensions||286 × 190 × 240 mm|
|Dimensions (mm) - DN1||
|Dimensions (mm) - DN2||
|Dimension (mm) - L||
|Dimension (mm) - W||
|Dimension (mm) - H||
|Dimension (mm) - H1||
Centrifugal Booster Pumps
1 x 240V
|Maximum Operating Current (A):||
Flow rate up to 160 l/min (9.6 m³/h), Head up to 56 m
Thin, clean, chemically non aggressive liquids without abrasive particles or fibres
|Recommended Fluid Temperature:||
-10 °C to +90 °C
up to +40 °C
|Maximum Suction Lift:||
up to 7m (at sea level)
|Maximum Working Pressure:||