Pedrollo PKm65 Pump
KSh21,560
FEATURES:
- Quiet operation due to the anti-vibration system between shaft and impeller
- Compact and more efficient motor with low energy consumption and lower operating temperature.
- Special paint which gives improved resistance against environmental corrosion
- Extended Life
- Liquid type: clean water
- USES: domestic & small scale water transfer
- Applications: water supply systems, pressure systems, irrigation pumps
In stock
The Pedrollo PKm is a robust, reliable and economical pump used principally for water transfer in domestic and small-scale water transfer applications. The pump body is made from cast iron with a brass insert set into the front housing for improved starting performance and protection from jamming. The impeller is made from brass.
These pumps can be installed for manual or automatic control using either the unique ‘Presscontrol’ unit or a pressure tank and switch. Also available is the integral ‘Hydrofresh’ version (Pkm60 only) which combines a 24L horizontal diaphragm tank, pressure switch and gauge with pressure settings of 1.4 Bar for pump start and 2.8 Bar for pump stop.
MOTOR
Pumps are close-coupled to a TEFC brushless induction motor designed for continuous operation. A thermal relay is provided in the windings to protect against electrical and mechanical overload and the pump can be connected directly to the mains power supply through a 10amp fuse or MCB.
Additional information
| Weight | 6.6 kg |
|---|---|
| Dimensions | 237 × 118 × 152 mm |
| Dimensions (mm) - DN1 | 1" |
| Dimensions (mm) - DN2 | 1" |
| Dimension (mm) - L | 235 |
| Dimension (mm) - W | 118 |
| Dimension (mm) - H | 152 |
| Dimension (mm) - H1 | 63 |
| Range: | Peripheral Booster Pumps |
| Enclosure Class: | IP44 |
| Voltage: | 1 x 240V |
| Insulation Class: | F |
| Speed: | 2800rpm |
| Model: | PKm65 |
| Power (kW): | 0.5 |
| Maximum Operating Current (A): | 3.4 |
| Performance Range: | Flow rate up to 90 l/min (5,4 m³/h), Head up to 100 m |
| -(O/C)- | OPERATING CONDITIONS: |
| Pumped Liquid: | Thin, clean, chemically non aggressive liquids without abrasive particles or fibres |
| Recommended Fluid Temperature: | -10 °C to +60 °C |
| Ambient Temperature: | up to +40 °C |
| Maximum Suction Lift: | up to 7m (at sea level) |
| Maximum Working Pressure: | 6 bar |
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.